-
HRC Bass Remote Control Basspegel Fernbedienung für Hertz Verstärker
Artikelnummer: HRC
HRC Bass Remote ControlKurzansicht -
Ground Zero GZDSP REM 4-8XII Kabelgebundene Fernbedienung für GZDSP 4-8XII
Artikelnummer: GZDSP REM 4-8XII
KurzansichtLCD Display
Fernbedienung für GZDSP 4-8XII
Fernbedienung mit Kabel und LCD Anzeige49,00 €Inkl. 19% MwSt., zzgl. VersandkostenLieferzeit: nicht lagernd (im Zulauf)
Nicht auf Lager
Kurzansicht -
Ground Zero GZDSP REM 4-8XII-S Fernbedienung mit Kabel und LCD Anzeige
Artikelnummer: GZDSP REM 4-8XII-S
KurzansichtFernbedienung mit Kabel und LCD Anzeige
Kompatibel zu GZDSP 4-8X / XII
inkl. Subwoofer Pegelregelung
Inklusive Verbindungskabel, 500 cm
Gesamtlautstärke
Subwoofer-Lautstärke
Speicherplatz-Auswahl
Stummschaltfunktion54,00 €Inkl. 19% MwSt., zzgl. VersandkostenLieferzeit: nicht lagernd (im Zulauf)
Nicht auf Lager
Kurzansicht -
Hifonics RC-TRX Controller Fernbedienung
Artikelnummer: RC-TRX
Kurzansicht- Master- oder Basslevel Gain regelbar
- 10 speicherbare DSP Settings wählbar
- Source Umschaltung (MAIN, AUX, OPTICAL)
- hochwertiges Alu-Gehäuse
-digitales LED Display
- passend für M8-DSP-E
- im Lieferumfang des M8-DSP und den TRX Modelle enthalten -
Hifonics HCV4 High to Low Level Converter
Artikelnummer: HCV4
Kurzansicht- 4-Kanal High-Low Adapter für OEM-Radios
- Remote In / Out
-Auto Turn On Funktion
- Pegelregler mit Clipping LED
- Slew Rate 9V/µS
-Kanaltrennung 80 dB
- SNR > 95 dB, Eingangspegel bis 10V
-sehr niedriger Ruhestrom
- 5 Hz - 60 KHz (+/-1 dB)
-verschraubte Cinchbuchsen
- in Blisterverpackung
-inkl. Samtbeutel -
ESX Controller für DSP-Geräte RC-QX
Artikelnummer: RC-QX
Kurzansicht
Master- oder Basslevel Gain regelbar
10 speicherbare DSP Settings wählbar
Source Umschaltung (MAIN, AUX, OPTICAL)
hochwertiges Gehäuse
digitales LED Display
im Lieferumfang des X-DSP, den QE & XE Modelle enthalten -
CRUNCH GPX500.2 2-Kanal Verstärker Endstufe 250 Watt RMS
Artikelnummer: GPX500.2
Kurzansicht- 2 x 70 / 125 W RMS (140 / 250 W max.) an 4 / 2 Ω
- 1 x 250 W RMS (500 W max.) gebrückt an 4 Ω
- HP 50-250 Hz
- LP 50-250 Hz
- Bass & Treble-Boost 0 / 6 / 12 dB
- Line-Outputs
- 64% Wirkungsgrad
- Abmessungen: 254x46x225 mmRegulärer Preis: 69,90 €
Special Price 64,90 €
Inkl. 19% MwSt., zzgl. VersandkostenLieferzeit: 1-3 Werktage
Kurzansicht -
CRUNCH GPX600.2 2-Kanal Verstärker Endstufe 300 Watt RMS
Artikelnummer: GPX600.2
Kurzansicht2 x 80/150 Watt RMS @ 4/2 Ω
2 x 160/300 Watt MAX @ 4/2 Ω
1 x 300 Watt RMS gebrückt @ 4 Ω
1 x 600 Watt MAX gebrückt @ 4 Ω
Hochpass-Filter 50~250 Hz
Tiefpass-Filter Filter 50~250 Hz
Bass & Treble Boost 0/6/12 dB
Cinch-Eingänge, Cinch-Ausgänge
Abmessungen: 254x46x250 mmRegulärer Preis: 79,90 €
Special Price 64,90 €
Inkl. 19% MwSt., zzgl. VersandkostenLieferzeit: 1-3 Werktage
Kurzansicht -
Ground Zero GZDSP Remote PRO-X Kabelgebundene Fernbedienung für GZDSP 6-8X PRO
Artikelnummer: GZDSP Remote PRO-X
KurzansichtFernbedienung mit Kabel und LCD Anzeige
Kompatibel zu GZDSP 6-8X PRO
Inklusive Verbindungskabel, 500 cm
Ausführung: Fernbedienung mit Kabel und Anzeige
Gehäuse: Kunststoff
LCD Anzeige: weiss -
Pioneer GM-D1004 4-Kanal Verstärker Endstufe Amp 4x100W / 181x38x64mm
Artikelnummer: GM-D1004
Kurzansicht- 4 x 100W / 181x38x64 mm
- 2 x 90 W (1 kHz / 4Ω gebrückt)
- 4 x 45 W (1 kHz / 2Ω)
- 74 dBA (ref: 1 W an 4Ω)
- Sensor für Lautsprechereingang Pegel- und Schaltsensor
- Kompakt -
Pioneer GM-A3702 Brückbarer 2-Kanal-Verstärker Endstufe 500 W max
Artikelnummer: GM-A3702
Kurzansicht- Maximale Eingangsleistung 500W (gebrückt) oder 2 x 170W (4 Ω) oder 2 x 250 W (2 Ω)
- CEA 2006-Leistung (THD + N = 1%) 2 x 60W (4 Ω)
- Kontinuierliche Ausgangsleistung (RMS) 2 x 60W (4 Ω) oder 1 x 190W (4Ω gebrückt) oder 2 x 95 W (2 Ω)
- Lastimpedanzfunktionalität 2-8 ohm (stereo)
- Signal/Rausch-Abstand > 95 dB
- Gehäuseabmessungen (B x H x T) 246(W) x 60(H) x 180(D) -
ESX Bluetooth Modul für Direction DSP BT-D
Artikelnummer: BT-D
Bluetooth Modul um den D66SP und D68SP mit Bluetooth zu erweitern. Ermöglicht Musik streaming und APP Steuerung der SoftwareKurzansicht -
ESX Controller für alle DSP`s RC-DQ
Artikelnummer: RC-DQ
KurzansichtFernbedienung für alle ESX Direction DSP`s
inkl. 5 Meter Kabel und sehr dünnem Verbindungsstecker
inkl. Einbaugehäuse aus Aluminium zum bündig Einlassen der Fernbedienung -
10cm Performance Coaxial - inline X-Over 50 WRMS
Artikelnummer: CC-M224
4 inch Performance Coaxial 50 WRMS - inline X-OverKurzansichtPerformance series M224 is a 10 cm (4") 2- way coaxial speaker with a 16 mm tweeter.
Small installation depth, only 48 mm
Polypropylene cone and rubber surround
Crossover with 6 dB slope.
Grilles are included.
Specifications
Woofer size 10 cm (4")
Tweeter 16 mm (0,63") mylar
Power handling capacity 50 W RMS / 75 W max. 150 W peak
Impedance 4 ohm
Frequency range 75 - 18.000 Hz
Sensitivity 85 dB (1W/1m)
Outer diameter of woofer 100 mm (4")
Magnet size 80 mm (3,15")
Mounting depth 48 mm ( 1,89")
Mounting hole 97 mm (3,82")
EAN Bar code 7331644825104
-
13cm Performance Coaxial - inline X-Over 50 WRMS
Artikelnummer: CC-M225
5.25 inch Performance Coaxial 50 WRMS - inline X-OverKurzansichtPerformance series M225 is a 13 cm (5,25") 2- way coaxial speaker with a 16 mm tweeter.
Small installation depth, only 43 mm
Fibre glass cone and rubber surround
Crossover has a 6/12 dB slope.
Grilles are included.
Specifications
Woofer size 13 cm (5,25")
Tweeter 16 mm (0,63") mylar
Power handling capacity 50 W RMS / 75 W max. 150 W peak
Impedance 4 ohm
Frequency range 75 - 18.000 Hz
Sensitivity 85 dB (1W/1m)
Crossover Cable filter with 6/12 dB slope (LP/HP)
Outer diameter of woofer 130 mm (5,12")
Magnet size 80 mm (3,15")
Mounting depth 43 mm ( 1,7")
Mounting hole 120 mm (4,72")
EAN Bar code 7331644822103
-
Reference Line 25mm Hochtöner - seperate X-over 50 WRMS
Artikelnummer: CD-RC25
25mm tweeters with X-over & Flush/Surface Fit Options 50 WRMSKurzansichtReference series tweeter RC25 is a 25 mm silk dome tweeter with neodymium magnet and copper cups in the voice coil / magnet system.
Acessories for dashboard and recessed mounting are included.
Specifications
Impedance 4 ohm
Power handling capacity 50 W RMS
Max power handling capacity 80 W
Frequency range 1.500 - 22.000 Hz
Fs - Resonant frequency 1400 Hz
Rec. crossover point 4 - 6 kHz
Sensitivity 93 dB (1W/1m)
Magnet size 30 mm (1,18") neodymium
Outer diameter 43 mm (1,7")
Mounting depth 20 mm ( 0,8")
Mounting hole 46 mm (1,81")
-
ESX 2CH High-Low Converter DLC22 (mit EPS Pro)
Artikelnummer: DLC22
Kurzansicht
Stufenlos geregeltes symmetrisches HD Netzteil
2-Kanal High-Input bis zu 400 Watt (bis 40V RMS) pro Kanal
Eingangsspannung umschaltbar 1-15V / 15-40V
2-Kanal RCA/Cinch Low-Output bis 9V RMS
Frequenzgang 5 Hz - 57 kHz (+0 dB, -1dB)
EPS PRO (umschaltbar) 10Ω - 150Ω - 600Ω
Auto Turn On (DC Offset / Signal)
Vox regelbar
generiert 12V Remote-Output
Clipping LED
floating ground - "schwebende Masse" via Jumper -
CRUNCH GPX1000.4 4-Kanal Verstärker Endstufe 500W RMS
Artikelnummer: GPX1000.4
Kurzansicht4 x 70/125 Watt RMS @ 4/2 Ω
4 x 140/250 Watt MAX @ 4/2 Ω
2 x 250 Watt RMS gebrückt @ 4 Ω
2 x 500 Watt MAX gebrückt @ 4 Ω
2 x Hochpass-Filter 50~250 Hz
1 x Tiefpass-Filter Filter 50~250 Hz
Bass Boost 0/6/12 dB
Cinch-Eingänge
Abmessungen: 254 x 46 x 330 mmRegulärer Preis: 99,90 €
Special Price 89,90 €
Inkl. 19% MwSt., zzgl. VersandkostenLieferzeit: 1-3 Werktage
Kurzansicht -
CRUNCH GPX1200.4 4-Kanal Verstärker Endstufe 600W RMS
Artikelnummer: GPX1200.4
Kurzansicht4 x 80/150 Watt RMS @ 4/2 Ω
4 x 160/300 Watt MAX @ 4/2 Ω
2 x 300 Watt RMS gebrückt @ 4 Ω
2 x 600 Watt MAX gebrückt @ 4 Ω
2 x Hochpass-Filter 50~250 Hz
1 x Tiefpass-Filter Filter 50~250 Hz
Bass Boost 0/6/12 dB
Cinch-Eingänge
Abmessungen: 254 x 46 x 330 mmRegulärer Preis: 99,90 €
Special Price 89,90 €
Inkl. 19% MwSt., zzgl. VersandkostenLieferzeit: 1-3 Werktage
Kurzansicht -
16.5cm Performance Coaxial - inline X-Over 50 WRMS
Artikelnummer: CC-M226
6,5 inch Performance Coaxial 50 WRMS- inline X-OverKurzansichtPerformance series M226 is a16,5 cm (6,5") 2- way coaxial speaker with a 16 mm mylar tweeter.
The small installation depth makes the speaker fit almost everywhere.
Polypropylene cone and foam surround
Crossover has a 6/12 dB slope.
Grilles are included.
Specifications
Tweeter 16 mm (0,63") mylar tweeter
Woofer size 16,5 cm (6,5")
Power handling capacity 50 W RMS / 75 W max / 150 W peak power
Impedance 4 ohm
Frequency range 70 - 18.000 Hz
Sensitivity 85 dB (1W/1m)
Crossover Cable filter with 6/12 dB slope (HP/LP)
Outer diameter of woofer 165 mm (6,5")
Cone material Polypropylene, foam surround
Magnet size 80 mm (3,15")
Mounting depth 45 mm ( 1,77")
Mounting hole 145 mm (5,7")
EAN Bar code 7331644822202
-
High Level Line Output Converter mit autosense bass remote
Artikelnummer: CA-HLC4.2
KurzansichtHigh Level Line Output Converter with autosense/bass remoteThis converter is designed for use with head units in cars without RCA low level output from the head unit. Most modern car amplifiers are equipped with high level inputs and these work OK with older factory radios but often will not work with modern head units especially if they have digital output chips.
This converer is designed to work with all head units thanks to fully balanced input circuits.
The converter can be used for both 2 -and 4 -channel amplifiers and have up to 3v output to minimize noise in amp input section. Perfect for adding subwoofer to a OEM system with the EBC external remote.
Note: If using in 2 channel mode channels 1 & 2 must be connected for the signal sensing circuit to function.
Technical facts HLC4
Number of channels: 4
Power supply: 12 V DC (min 10,8, max 15,6V)
Current draw, no signal: 4 mA
Current draw, operational: Typical 25 mA
Output voltage: 3 V RMS
Distortion: 0,002% THD @ 3V output, 10 kohm load
Clip point: 3,7 V RMS @ 14,4 V power supply
Output impedance: 200 ohms nominal
Input impedance: Ch. 1: 44 ohms, Ch. 2-4: 100 ohms, All channels are fully balanced
Sensing modes: DC level or Audio, both operate on Ch. 1 only.
Remote output: 12 Volts, max 100 ma max, protected against short term short circuit
Indicators: Green= Remote on, Blue = Audio sensing active
Reverse polarity protected.Summing output ch 3 4 for subwoofer amp when used with optional EBC
-
25cm DLS Performance Line Subwoofer 200 WRMS
Artikelnummer: CS-MCW10
Performance 10" Subwoofer Paper Cone 600W Max Power (200WRMS)KurzansichtPerformance series MCW10 is a 10 inch subwoofer. It is an upgraded version of the previous KW10.
Basket in frosted black colour with push terminals.
With parameters that makes them work fine in both sealed and vented boxes.
The bass drivers has a cone of strong pressed paper and a powerful magnet system creates a good bass control.
Specifications
Outer diameter of woofer 255 mm (10")
Mounting depth 115 mm (4,52")
Mounting hole 230 mm (9,05")
X-max + 9 mm (0,35")
Frequency range 25 Hz - 1 kHz
Impedance 4 ohm
Sensitivity 86,7 dB
Power handling capacity 200 W
Max power handling capacity 400 W
Peak power 600 W
T/S parameters
single V/C
Fs 40,4 Hz Re 2,9 Ohm Qms 5,08
Vas 21,4 liter Vas 0,76 Cuft Qes 0,48
Qts 0,44 Sd 300 cm² BL 12,90
Woofer size 10" (25 cm)
Magnet size 120 mm (4,72")
EAN Bar code 7331644823308
Weight 2,8 kg (6,17 lb)
-
Ground Zero GZDSP BTB-APP Adapter für kabellose Musikübertragung speziell für GZDSP PRO Produkte
Artikelnummer: GZDSP BTB-APP
KurzansichtAdapter für kabellose Musikübertragung speziell für GZDSP PRO Produkte
DSP Steuerung über App (iOS/Android)
Kompatibel zu GZDSP 4.80A-PRO & GZDSP 6-8X PRO
App verfügbar für iOS und Android -
ESX HORIZON 2CH AMP HXE110.2
Artikelnummer: HXE110.2
2 x 70 / 110 W RMS @ 4 / 2 Ω 1 x 220 W RMS gebrückt @ 4 ΩKurzansicht
Highpass 10-250 Hz
Lowpass 50-250 Hz
Bass Boost 0-12 dB
Bandpass-Funktion
Line-Outputs
62% Wirkungsgrad -
CRUNCH GTS2250 2-Kanal Verstärker Endstufe
Artikelnummer: GTS2250
Kurzansicht- 2 x 75 / 125 W RMS an 4 / 2 Ω
- 1 x 250 W RMS gebrückt an 4 Ω
- HP 10-250 Hz
- LP 50-250 Hz
- Bandpass-Funktion
- Bass Boost 0-12 dB
- Line Outputs
- Auto-Turn-On
- High Level Inputs mit EPS
- 62% Wirkungsgrad -
16.5cm 2 Wege LS-System - separate X-Over 60 WRMS
Artikelnummer: CK-M6.2
KurzansichtPerformance
6.5inch 2-way Component System with Separate X-Over 60 WRMSPerformance series M6.2 is a 16,5cm (6,5") 2-way component kit with a separate 25 mm tweeter.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.
The bass driver has a cone of paper reinforced with textile fibres, a 90 mm powerful magnet guarantees a good bass control.
Grilles are included.
Small filter boxes to the tweeters.
Good value for money!
Specifications
Woofer size 16,5 cm (6,5")
Tweeter 25 mm soft dome tweeter
Power handling capacity 60 W RMS / 80 W max, 160 Watt peak power
Impedance 4 ohm
Frequency range 55 - 25.000 Hz
Crossover point (Hz) 5500 Hz
Sensitivity 87 dB (1W/1m)
Outer diameter of woofer 165 mm (6,5")
Magnet size 90 mm (3,54")
Cone material Paper cone with textile fibres
Mounting depth 65mm ( 2,56")
Crossover 12dB slope filterbox to the tweeter, two tweeter levels
Mounting hole 145 mm (5,75")
Size of filter box 73 x 36 x 35 mm
EAN Bar code 7331644820505
-
16.5cm 2 Wege LS-System- separate X-Over 55 WRMS
Artikelnummer: CK-MK6.2
KurzansichtPerformance
6.5inch 2-way Component System with Separate X-Over 60 WRMSPerformance series M6.2 is a 16,5cm (6,5") 2-way component kit with a separate 25 mm tweeter.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.
The bass driver has a cone of paper reinforced with textile fibres, a 90 mm powerful magnet guarantees a good bass control.
Grilles are included.
Small filter boxes to the tweeters.
Good value for money!
Specifications
Woofer size 16,5 cm (6,5")
Tweeter 25 mm soft dome tweeter
Power handling capacity 60 W RMS / 80 W max, 160 Watt peak power
Impedance 4 ohm
Frequency range 55 - 25.000 Hz
Crossover point (Hz) 5500 Hz
Sensitivity 87 dB (1W/1m)
Outer diameter of woofer 165 mm (6,5")
Magnet size 90 mm (3,54")
Cone material Paper cone with textile fibres
Mounting depth 65mm ( 2,56")
Crossover 12dB slope filterbox to the tweeter, two tweeter levels
Mounting hole 145 mm (5,75")
Size of filter box 73 x 36 x 35 mm
EAN Bar code 7331644820505
-
CRUNCH GTI-2200 2-Kanal Verstärker Endstufe
Artikelnummer: GTI2200
Kurzansicht- 2 x 110 / 200 W RMS (220 / 400 W max.) an 4 / 2 Ω
1 x 400 W RMS (800 W max.) gebrückt an 4 Ω
- HP 60-1200 Hz
- LP 40-150 Hz
- Bass-Boost 0-12 dB @ 45 Hz
- High Level Inputs
- Chrom-Panels
- Line-Outputs
- blau beleuchtetes Crunch-Logo
- 60% Wirkungsgrad -
Ground Zero GZDSP BTS 4-8XII App/Bluetooth Stick für GZDSP 4-8X & GZDSP 4-8XII
Artikelnummer: GZDSP BTS 4-8XII
KurzansichtApp/Bluetooth Stick für GZDSP 4-8X & GZDSP 4-8XII
App-Steuerung (iOS & Android)
Direktes Musik Streamen über Bluetooh
App "GZDSP 4-8X Control" für iOS & Android -
ESX SIGNUM 2CH AMP SXE110.2
Artikelnummer: SXE110.2
2 x 70 / 110 W RMS @ 4 / 2 Ω 1 x 220 W RMS gebrückt @ 4 ΩKurzansicht
High Level Inputs mit EPS
Auto-Turn-On
Highpass 10-250 Hz
Lowpass 50-250 Hz
Bass Boost 0-12 dB
Bandpass-Funktion
Line-Outputs
62% Wirkungsgrad -
10cm Performance Coaxial - separate X-Over 60 WRMS
Artikelnummer: CC-M524
4" Performance Coaxial 60 WRMS- Separate X-OverKurzansichtPerformance series M524 is a 10 cm (4") 2-way coaxial speaker with a 20 mm silk dome tweeter that guarantees a fantastic sound quality in any installation.
Separate filter box with high class components.
Grilles are included.
Specifications
Woofer size 10 cm (4")
Tweeter 20 mm (0,8") silk dome
Power handling capacity 60 W RMS / 90 W max, 180 W peak power
Impedance 4 ohm
Frequency range 60 - 20.000 Hz
Sensitivity 80 dB (1W/1m)
Crossover Box filter with 6dB slope (HP)
Outer diameter of woofer 102 mm (4")
Cone material Coated paper cone
Magnet size 80 mm (3,15")
Mounting depth 60 mm ( 2,36")
Mounting hole 97 mm (3,81")
Size of filter box 73 x 36 x 35 mm
EAN Bar code 7331644821908
-
30cm DLS Performance Line Subwoofer 250 WRMS
Artikelnummer: CS-MCW12
Performance 12" Subwoofer Paper Cone 750W Max Power (250WRMS)KurzansichtPerformance series MCW12 is a 12 inch subwoofer. It is an upgraded version of the previous KW12.
Basket in frosted black colour with push terminals.
With parameters that makes them work fine in both sealed and vented boxes.
The bass drivers has a cone of strong pressed paper and a powerful magnet system creates a good bass control.
Specifications
Woofer size 12" (30 cm)
Outer diameter of woofer 310 mm (12")
Mounting depth 130mm (5,12")
Mounting hole 280 mm (11")
X-max + 9 mm (0,35")
Frequency range 20 Hz - 1 kHz
Impedance 4 ohm
Sensitivity 87,75 dB
Power handling capacity 250 W
Max power handling capacity 500 W
Peak power 700 W
T/S parameters
single V/C
Fs 33,5 Hz Re 3,0 Ohm Qms 6,16
Vas 57 liter Vas 2,0 Cuft Qes 0,57
Qts 0,52 Sd 491 cm² BL 12,13
Magnet size 120 mm (4,72")
EAN Bar code 7331644823407
-
6x9 Zoll Performance Coaxial - inline X-Over 80 WRMS
Artikelnummer: CC-M369
6x9" Performance Coaxial 100 WRMS - inline X-OverKurzansichtPerformance series M369 is a 6 x 9 " 3-way triaxial with 25 mm silk dome mid driver and a 20 mm mylar tweeter.
The bass driver has a cone of nonpress paper and rubber edge. Together with a powerful magnet system it guarantees a good bass control.
Grilles are included.
Specifications
Woofer size 6" x 9" (165 x 236 mm
Tweeter 20 mm (0,8") mylar tweeter, 25 mm (1") midrange
Power handling capacity 100 W RMS / 150 W max / 250 W peak power
Impedance 4 ohm
Frequency range 45 - 20.000 Hz
Sensitivity 88 dB (1W/1m)
Crossover Internal filter
Outer diameter of woofer 165 x 236 mm
Magnet size 100 mm (3,94")
Cone material Nonpress paper
Mounting depth 86 mm ( 3,38")
Mounting hole 155 x 221 mm (6,1 x 8,7")
EAN Bar code 7331644822905
-
16.5cm 2 Wege LS-System - separate X-Over 60 WRMS
Artikelnummer: CK-M6.2i
KurzansichtPerformance
6.5inch 2-way Component System with Separate X-Over 60 WRMSPerformance series M6.2 is a 16,5cm (6,5") 2-way component kit with a separate 25 mm tweeter.
Install the tweeter on the dashboard or recessed in the door, all mounting parts are included.
The bass driver has a cone of paper reinforced with textile fibres, a 90 mm powerful magnet guarantees a good bass control.
Grilles are included.
Small filter boxes to the tweeters.
Good value for money!
Specifications
Woofer size 16,5 cm (6,5")
Tweeter 25 mm soft dome tweeter
Power handling capacity 60 W RMS / 80 W max, 160 Watt peak power
Impedance 4 ohm
Frequency range 55 - 25.000 Hz
Crossover point (Hz) 5500 Hz
Sensitivity 87 dB (1W/1m)
Outer diameter of woofer 165 mm (6,5")
Magnet size 90 mm (3,54")
Cone material Paper cone with textile fibres
Mounting depth 65mm ( 2,56")
Crossover 12dB slope filterbox to the tweeter, two tweeter levels
Mounting hole 145 mm (5,75")
Size of filter box 73 x 36 x 35 mm
EAN Bar code 7331644820505
-
CRUNCH DEFINITION DSX-1750 1-Kanal Verstärker Monoblock Endstufe
Artikelnummer: DSX1750
Kurzansicht- 1 x 200 / 375 Watt RMS an 4 / 2 Ω
1 x 400 / 750 Watt max. an 4 / 2 Ω
- LP 40-180 Hz
- Subsonic 15-55 Hz
- Variabler Bass-Boost 0-12 dB @ 45 Hz
- Bass Remote
- 64% Wirkungsgrad -
CRUNCH GPX1000.1D Digital Mono Verstärker Endstufe
Artikelnummer: GPX1000.1D
Kurzansicht- 1 x 250/500 Watt RMS an 4/2 Ohm
- 1 x 500/1000 Watt max. an 4/2 Ohm
- Subsonic 10 Hz - 35 Hz
- LP 22 Hz - 160 Hz
- Bass Boost 0-12 dB
- RCA/Cinch-Eingänge
- Basspegel FernbedienungRegulärer Preis: 149,00 €
Special Price 129,00 €
Inkl. 19% MwSt., zzgl. VersandkostenLieferzeit: 1-3 Werktage
Kurzansicht
